User Tools

Site Tools


cuttable_materials
Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
cuttable_materials [2018/02/15 04:58]
thsadmin
cuttable_materials [2018/02/15 06:43] (current)
thsadmin
Line 1: Line 1:
 +This guide was copied verbatim from [[ http://​atxhackerspace.org/​wiki/​Laser_Cutter_Materials | ATX Hackerspace'​s Guide]]. ​ Only slight changes made where appropriate.
 +
 {{LaserCutterNavBox}} {{LaserCutterNavBox}}
 There are a wide range of materials that the [[Laser Cutter]] can cut, etch or mark - but some simply don't work (eg metals) and some are extremely hazardous to either humans or the machine itself (eg PVC and Vinyl). ​ It is therefore imperative that you check these lists before attempting to cut materials that you have not worked with before. There are a wide range of materials that the [[Laser Cutter]] can cut, etch or mark - but some simply don't work (eg metals) and some are extremely hazardous to either humans or the machine itself (eg PVC and Vinyl). ​ It is therefore imperative that you check these lists before attempting to cut materials that you have not worked with before.
cuttable_materials.txt ยท Last modified: 2018/02/15 06:43 by thsadmin